ZAS103AY Laboratory anti-overflow PP sink

ZAS103AY Laboratory small type anti-overflow China PP sink/tank

Size: 460*360*290mm

Product Features - ZAS103AY anti-overflow PP sink

1. This sink,Which is injection molded and made of high grade PP fresh material,is of high density,stability and elasticity,Also it is aging resistant.

2. Innovative PP basket trap solves the jamming problem caused by impurities.

3. Accessories: High grade PP overflow, including stopper and basket trap.

The overflow prevention function of the laboratory PP sink is primarily achieved through the overflow hole design, effectively preventing water overflow during experiments and ensuring laboratory safety.  

1. Core Features & Design

(1) Overflow Hole Design: The washbasin is equipped with an integrated overflow hole, where the overflow pipe is integrally injection-molded with the basin body. This design prevents water from overflowing onto the countertop during unattended experiments.  

(2) Material Characteristics: Made from high-density new PP material through injection molding, it exhibits corrosion resistance, acid/alkali resistance, chemical resistance, heat resistance, electrical insulation, high-strength mechanical properties, and excellent wear-resistant processing performance.  

2. Application Scenarios

*Laboratory: Prevents water overflow onto the countertop during unattended experiments, ensuring laboratory safety.  

*Hospital Lab: Features anti-overflow, odor-resistant, and thickened washbasins, suitable for hospital laboratory environments.

The anti overflow function of PP sink is like a "safety guard" in the laboratory, especially critical in experimental scenarios, which can prevent water from overflowing the table, protect equipment safety, and reduce the risk of blockage.

1. Prevent water from flooding the table and protect experimental safety

Core function: If the faucet is forgotten to turn off or the drainage outlet is blocked during the experiment, it will automatically discharge when the water level rises to the overflow hole, avoiding water overflowing the table. For example, when the laboratory resumes water supply after a water outage, if left unattended, the overflow function can prevent water from overflowing and prevent floods.

Practical case: When conducting experiments in the laboratory, if concentrated sulfuric acid splashes onto the body, it is necessary to immediately rinse with a large amount of tap water. The anti overflow function of PP sink ensures that water will not overflow during the flushing process, ensuring the safety of experimental personnel.

2. Protect experimental equipment and extend its service life

Indirect protection: The overflow hole controls the water level to prevent water from soaking the sealant at the edge of the sink, preventing it from aging and falling off. At the same time, prevent water from overflowing onto the experimental table to avoid deformation of the table or electrical short circuits.

Material advantage: The PP sink is made of high-density PP new material injection molding, which is corrosion-resistant, acid and alkali resistant, has a long service life, and can be further extended by the overflow function.

3. Balance air pressure to ensure smooth drainage

Air pressure balance: The overflow hole can balance the air pressure inside the sink and outside, avoiding slow drainage or water accumulation caused by negative pressure. For example, when the air pressure in high-altitude areas is low, the pressure balance effect of the overflow hole is more obvious, which can completely solve the "gurgling" noise during drainage.

4. Assist in draining residual accumulated water

Convective drainage: When there is a small amount of residual water in the sink and the height does not reach the height of the drainage outlet, the overflow hole can cooperate with the drainage outlet to form convection and assist in draining the accumulated water. For example, if the soap residue at the bottom of the sink in the bathroom is not completely drained after washing the face, it can breed bacteria and produce odors. Using overflow holes to assist drainage can keep the bottom of the sink dry.

Summary: The anti overflow function of PP sink is an important guarantee for experimental safety, which can effectively prevent water from overflowing the table, protect equipment, reduce the risk of blockage, and ensure smooth drainage. This function is particularly important in high demand scenarios such as laboratories.

Other PP sink sizes and Colors - ZOOANY LAB

Please feel free to request a PP sink sample catalogue on WhatsApp:+8618205509969 for more information.